Assalam-O-Alaikum Dost! Login Or Signup


Welding Parts Suppliers Tells You How To Use It Intuitively
Posted On 05/15/2019 03:55:22 by otsedtalex

We are a prominent and highly recognized China Stamping parts (including welding) manufacturers and China Stamping parts (including welding) suppliers. We can provide high quality metal castings with an annual production capacity high. nbstarlite's Stamping parts (including welding) products at excellent prices To assist our customers to be competitive in their own markets and industries.
The owner's manual for the machine tells you what it takes, and there usually are instructions on the flip-up panel on the side of the machine. It's all surprisingly ­intuitive.
You can pick up a reusable tank of gas from your local welding supplier. The psi will vary depending on the type of torch you're Using and how deep you want your welds, but generally you'll stick to between 15 and 25. As for the gas mixture, a home hobbyist with a wire-feed welder can usually get by with 100 percent CO2 shielding gas.
a cleaner weld, use 75 percent CO2 and 25 percent argon.
Welding cart: Wire-feed welders can weigh up to 75 pounds, so build or invest in a welding cart to increase portability.
Awl or carbide scribe: to mark cut lines.
Right-angle grinder: for grinding, beveling, and flattening welds, as well as for surface preparation.
Miter clamp or magnet square: to secure joints.
Chipping hammer and wire brush: for cleaning up slag and spatter.
Welding pliers: to trim welding wire and remove spatter from the welding-gun nozzle.
Why you want an auto-darkening helmet: The light generated by any arc-welding process is incredibly bright, and it will burn your eyes if you're not wearing a helmet. For years traditional welding helmets had a permanently darkened viewing shade, but That means you had to flip your mask up whenever you weren't welding. New auto-darkening helmets protect against harmful light emissions by automatically darkening their clear lens to a preselected shade in milliseconds, using LCD technology in their glass. Controls to personalize settings.
3. Prepping your weld
Ready the metals
Use a wire brush and acetone to remove oils and dirt. If you need to cut the metal, mark a line with your awl or carbide scribe, and cut along it with a metal-cutting chop saw, a hacksaw, or a grinder with a Cutoff wheel.
Grind the edges
Advertisement - Continue Reading Below
But only the ones you plan to join, and use a right-angle grinder. This is called chamfering. A chamfer is a bevel between the adjoining edges of two pieces of material, typically at 45 degrees. This creates a space for the filler and Provide greater structural integrity to your weld. Doing this for butt joints, especially, is a good idea.For more information, please pay attention to XingHui Welding Parts Suppliers


Tags: Welding Parts Suppliers



Copyrights © 2008-2014 - DOSTEE.PK - All Rights Reserved